SHS42GS

  • SHS42-GS

    SHS42GS

    Spring loaded sensor bracket with flat suction cup, strong hold on even sheets due to suction cup.

  • SHS42 + SHK

    SHS42GS

    Spring loaded sensor bracket with flat suction cup, strong hold on even sheets due to suction cup.

Spring loaded sensor bracket with flat suction cup, strong hold on even sheets due to suction cup.

For vertical destacker:

+
For robot loader and high speed linear destackers:

-
For inclined sheet stacks:

0

For Tailor Welded Blanks + TWB

-

 

(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)

Suitable sensors:
(*SHS75GS)		 P42GS, P42AGS, PW42GS, PW42AGS
(*P75VGS, P75GS)
Diameter of suction cup: 115mm / 155mm (SHS75GS)
Spring travel: approx. 26mm
Total height (unloaded): 141mm / 128mm (SHS75GS)
Mounting: Hole 20.5mm for SHK clamping device
Weight: approx. 1.25kg (2.75lbs) /
approx. 1.5kg (3.30lbs) (SHS75GS)
Pressure force at 1/2 spring travel: approx. 48 N
Sensor mounting: Thread M42 x 1.5 /M75 x 1.5 (SHS75GS)
 Vacuum feed: Hose 8mm OD / 10mm OD (SHS75GS)
 Suction delay time:* approx. 0.1s

 * is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)

SHK Clamping device for mounting of sensor brackets to destacking tools with crossing over clamp 25 mm.

To top