SHX42

  • SHX42

    Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel, very lightweight, for high lateral acceleration (up to 2g). Minimal wear, durable designed, low lifecycle costs.

  • SHX-AZ2-25

    Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel, very lightweight, for high lateral acceleration (up to 2g). Minimal wear, durable designed, low lifecycle costs.

  • SHX-AZ-BILSING

    Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel, very lightweight, for high lateral acceleration (up to 2g). Minimal wear, durable designed, low lifecycle costs.

  • SHX-AZQ

    Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel, very lightweight, for high lateral acceleration (up to 2g). Minimal wear, durable designed, low lifecycle costs.

  • SHX42 with accessories

    Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel, very lightweight, for high lateral acceleration (up to 2g). Minimal wear, durable designed, low lifecycle costs.

Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear.

For vertical destacker:

+
For robot loader and high speed linear destackers:

+
For inclined sheet stacks:

++

For Tailor Welded Blanks + TWB

++

 

(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)

Suitable sensors: P42GS, P42AGS, PW42GS, PW42AGS
Diameter of suction cup: 115mm
Spring travel: approx. 70mm
Total height (unloaded): 120mm
Weight: approx. 0.85kg (1.87lbs)
Mounting: M8 tap holes 2 out of 10 needed
Pressure force at 1/2 of spring travel: approx. 25N
Sensor mounting: Thread M42 x 1.5
 Vacuum feed: Hose 8mm OD
 Suction delay time:* approx. 0.1s
Suction cup hardness: 60 shore

 

* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)

Accessory: SHX-AZ2-25 Shank for 25mm clamp collar / swivel arm
SHX-AZ-BILSING Adaptor for Bilsing quick change coupling
SHX-AZQ-19 Adaptor with Ø 19mm stud for swivel arm
SHX-AZQ-25 Adaptor with Ø 25mm stud for swivel arm

To top