01.08.2017 13:45 Age: 7 yrs
Category: News
By: ROLAND ELECTRONIC

OSI40 - Laser based System for Surface Inspection and Fault Detection

The System OSI40 was designed for Surface Inspection and Fault Detection with 3D-Laser sensors and EHR® AluCheck 2D/3D Sensors. Suitable applications are Weld Seam Inspection, Geometry Inspection, Pore Inspection, Crater and Crack Testing ...


The system consists of the operation computer equipped with the proven TIVIS® software and the proper sensor system. In addition, the system is able to control a linear axis of Nanotec type. This leads to a cost- effective mechanization of the measurement procedure.


The TIVIS® software was developed by the EHR® company for the video inspection of stamped parts in high-speed punch presses. TIVIS® is the acronym for “Tool Integrated Vision System“ and it covers meanwhile a wide range of measuring and inspection tasks, for example the automated at testing of welds seams on automotive parts or at measuring machines for serial production parts.

Features

 

  • Compact design
  • Full HD graphics resolution
  • For Weld Seam Geometry Inspection, Pore Inspection, Crater and Crack Testing
  • Operating computer for TIVIS®
  • For the connection of EHR® AluCheck components
  • For the connection of standard laser triangulation sensors
  • Fieldbus interface
  • Interface for 1 axis drive

Technical Data

  • Applications: Surface Inspection and Fault Detection, applications for Weld Seam Inspection, Geometry Inspection, Pore Inspection, Crater and Crack Testing.
  • Components: Industrial PC in protective housing with TIVIS®-Software and a proper sensor system.
  • Measuring method: Laser triangulation
  • Function principle: The system is based on principles of laser triangulation an permits surface inspection of different parts.
  • The surface is measured by the sensors. Hereby the sensor has a constant distance to the surface of the object to be inspected.
  • Special features: Compact design, Full HD graphics resolution

To top