SHS42G-FB
| SHX42 | SHX42-85F | SHX42-DL | SHS42G-FB | SHS42G-FB80 | SHS42GS | SHS42GS-85 | SH42GS | SH75GS | SHS75GS |
Spring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks.
For vertical destacker: | + |
For robot loader and high speed linear destackers: | 0 |
For inclined sheet stacks: | + |
For Tailor Welded Blanks + TWB | + |
(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)
Suitable sensors: | P42GS, P42AGS, PW42GS, PW42AGS |
Diameter of suction cup: | 105mm |
Spring travel: | approx. 34mm, plus approx. 20mm compression travel |
Total height (unloaded): | approx. 128mm |
Weight: | approx. 1.2kg (2.64lbs) / approx. 0.75kg (1.87lbs) (SHS42G-FB80) |
Mounting: | Hole 20.5mm for SHK clamping device |
Pressure force at 1/2 spring travel: | approx. 60N |
Sensor mounting: | Thread M42 x 1.5 |
Vacuum feed: | Hose 8mm OD |
Suction delay time:* | approx. 0.5s |
* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)
- SHS42G-FB_GE (yellow)
Bellow suction cup, hardness 55 shore
Documentation