SHS75GS Series
Applications
Spring loaded sensor bracket (SH75GS). Spring loaded sensor bracket with flat suction cup (SHS75GS). Well-suited for big sheet thicknesses.
Features & Technical Data
| Suitable sensors: | P75VGS, P75GS |
| Diameter of suction cup: | 155 mm (not for SH75GS) |
| Spring travel: | approx. 26 mm |
| Total height (unloaded): | 128 mm |
| Mounting: | Hole 20.5 mm for SHK clamping device |
| Weight: | SH75GS: approx. 0.7 kg (1.54 lbs) | SHS75GS: approx. 1.5 kg (3.30 lbs) |
| Pressure force at 1/2 spring travel: | approx. 48 N |
| Sensor mounting: | Thread M75 x 1.5 mm |
| Vacuum feed: | Hose 10 mm OD |
| Suction delay time:* | approx. 0.1 s |
* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)
Device Variants
- SH75GS: Spring loaded sensor bracket
- SHS75GS: Spring loaded sensor bracket with flat suction cup, diameter 155 mm
Application Characteristics
| SHS75GS | SH75GS | |
| For vertical destackers: | + | + |
| For robot loader and high speed linear destackers: | - | - - |
| For inclined sheet stacks: | 0 | - |
For Tailor Welded Blanks (TWB) | - | - |
(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)
Spare parts
| SHS75GS | SH75GS |
Spring Kit S0023211 | Spring Kit S0023211 |
| Foam rubber ring 2395038 | |
| Rubber pressure pad 2395039 |
Accessory
| SHK | Clamping device for mounting of sensor brackets to destacking tools with crossing over clamp 25 mm. |
For your individual application test, go directly to our
Downloads for SHS75 Series
