SHX42 Series
Applications
Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g). Minimal wear, durable design, low lifecycle costs.
Features & Technical Data
| Suitable sensors: | P42GS, P42AGS, PW42GS, PW42AGS |
| Diameter of suction cup: | 115 mm (SHX42) | 85 mm (SHX42-85) | 105 mm (SHX42-DL) | |
| Spring travel: | approx. 70 mm |
| Total height (unloaded): | 120 mm |
| Weight: | approx. 0.85 kg (1.87 lbs) |
| Mounting: | M8 tap holes 2 out of 10 needed |
| Pressure force at 1/2 of spring travel: | approx. 25 N |
| Sensor mounting: | Thread M42 x 1.5 |
| Vacuum feed: | Hose 8 mm OD |
| Suction delay time:* | approx. 0.1 s |
| Suction cup hardness: | 60 shore |
* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)
Device Variants
- SHX42: Spring loaded sensor bracket with rubber lip, diameter 115 mm
- SHX42-85F: Spring loaded sensor bracket with rubber lip, diameter 85 mm
- SHX42-DL: Spring loaded sensor bracket with with double lip, diameter 105 mm
Application Characteristics
| For vertical destacker: | + |
| For robot loader and high speed linear destackers: | + |
| For inclined sheet stacks: | ++ |
For Tailor Welded Blanks (TWB): | ++ |
(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)
Spare parts
| SHX42 | SHX42-85F | SHX42-DL |
| Strap set SHX42-STRAP-80 | Strap set SHX42-STRAP-80 | Strap set SHX42-STRAP-80 |
| Sealing ring 2395126 | Sealing ring 2395126 | Sealing ring 2395126 |
| Rubber lip 2395110 (black) | Rubber lip 2395168 (nero) | Bellow suction cup 2395218 (yellow) Hardness: 55 shore |
| Rubber pressure pad 2395109 | Rubber pressure pad 2395167 |
Accessories
| SHX-AZ2-25 | Shank for 25mm clamp collar / swivel arm |
| SHX-AZ-QUICK | Adaptor for quick change coupling |
| SHX-AZQ-19 | Adaptor with Ø 19mm stud for swivel arm |
| SHX-AZQ-25 | Adaptor with Ø 25mm stud for swivel arm |
For your individual application test, go directly to our
Downloads for SHX42 Series
