SHX42-DL

  • SHX42-DL

    Spring loaded sensor bracket with double lip for extra vacuum protection and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear, very low vacuum loss.

  • SHX-AZ2-25

    Spring loaded sensor bracket with double lip for extra vacuum protection and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear, very low vacuum loss.

  • SHX-AZ-BILSING

    Spring loaded sensor bracket with double lip for extra vacuum protection and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear, very low vacuum loss.

  • SHX-AZQ

    Spring loaded sensor bracket with double lip for extra vacuum protection and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear, very low vacuum loss.

Spring loaded sensor bracket with double lip and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear, no vacuum loss.

For vertical destacker:▼ Application Characteristics

+
For robot loader and high speed linear destackers:

+
For inclined sheet stacks:

++

For Tailor Welded Blanks + TWB

++

 

(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)

Suitable sensors: P42GS, P42AGS, PW42GS, PW42AGS
Diameter of suction cup: 105mm
Spring travel: approx. 70mm
Total height (unloaded): 120mm
Weight: approx. 0.85kg (1.87lbs)
Mounting: M8 tap holes 2 out of 10 needed
Pressure force at 1/2 spring travel: approx. 25N
Sensor mounting: Thread M42 x 1.5
 Vacuum feed: Hose 8mm OD
 Suction delay time:* approx. 0.1s
Suction cup hardness 55 shore

 

* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)

Accessory: SHX-AZ2-25 Shank for 25 mm clamp collar / swivel arm
SHX-AZ-BILSING Adaptor for Bilsing quick change coupling
SHX-AZQ-19 Adaptor with Ø 19 mm stud for swivel arm
SHX-AZQ-25 Adaptor with Ø 25 mm stud for swivel arm

To top