UDK20
Application
The UDK20 is a single-side double sheet detector that can be used to monitor both FE and non-ferrous materials up to a sheet thickness of 4 mm.
In addition, double sheet monitoring is possible on austenitic stainless steel up to a sheet thickness of 2 mm.
Features & Technical Data
| Function principle: | Electromagnetic und Eddy Current |
| Materials: | All metals (FE and NF) |
| Sensor number: | Up to 2 sensors connectable; via Sensor Switch Box up to 4 sensors connectable |
| Material thickness: | 0.2 – 4.0 mm (FE- and NF material) 0.2 – 2.0 mm (Austenit) |
| Programs: | 255 Measuring programs selectable |
| Operation: | Operation via buttons; after set-up (Teach-In) feedback via light signals (detection of 0-sheet, 1-sheet and 2-sheet); additional display of sheet thickness in mm or inches |
| Versions: | Available as wall mount and front panel enclosure |
Device variations
- UDK20(-2PW)-B-R-S(-FP): Control from the PLC, Relais version
- UDK20(-2PW)-B-O-S(-FP): Control from the PLC, Opto coupler version
- UDK20(-2PW)-C-O-S(-FP): Data backup, Control from the PLC, Opto coupler version
- UDK20(-2PW)-PN-S(-FP)*: Data backup, Control from the ProfiNet
Sensors
| Sensor name | Function principle | Material | Material thickness |
| PW42AGS | Electromagnetic & Eddy Current | FE and NF material | Up to 4 mm (Depending on material) |
For your individual application test, go directly to our
For optimum mounting of our sensors use our
Downloads for UDK20
