LTM-ULTRA

| LTM-SMART | LTM-MAXI | LTM-ULTRA |

The LTM-ULTRA high-performance thickness measuring system enables touch-free operation and high-precision thickness measurement.
The combination of state-of-the-art confocal sensors and their integration into modern technology in conjunction with a measurement software specially developed for this requirement allows the acquisition, evaluation, visualization, analysis of data and archiving of thickness values as well as cross-section measured values for your application.

  • LTM-ULTRA

    High performance measuring system for Static and Dynamic Thickness Gauging, with a measurable material thickness from 0.01 to 3.0mm.

    Traversing thickness gauging, fully automated calibration routine.

    Resolution of sensors 0.25 µm, multicolour laser confocal method

  • LTM-ULTRA

    High performance measuring system for Static and Dynamic Thickness Gauging, with a measurable material thickness from 0.01 to 3.0mm.

    Traversing thickness gauging, fully automated calibration routine.

    Resolution of sensors 0.25 µm, multicolour laser confocal method

  • LTM-S software and LTM TOUCH

    LTM-S software

    LTM-S (internal client) includes all necessary tools for the operation, processing, presentation and provision of the recorded thickness measurement values. LTM-S is included in the scope of delivery of theThickness Gauging Systems LTM-BASE, LTM-SMART, LTM-MAXI and LTM-ULTRA.

  • LTM-ULTRA

    LTM-ULTRA

  • LTM-ULTRA

    LTM-ULTRA

The LTM-ULTRA high-performance thickness measuring system from ROLAND ELECTRONIC was developed to enable the non-contacting measurement of a wide variety of materials and surfaces with very high accuracy down to the μm range.
The system has been designed specifically for the usage in the metalworking industry and is used in rolling mills, longitudinal and cross-section plants, press lines, the can industry, metal sheet processing and many more.

The following measurement modes can be realized:
• Line measurement
• Micro-traversing
• Macro-traversing
• Macro-traversing with track measurement

The LTM-ULTRA high-performance thickness measuring system from ROLAND ELECTRONIC has been designed specifically for the usage in the metalworking industry and is used in rolling mills, longitudinal and cross-section plants, press lines, the can industry, metal sheet processing and many more.

  • Measurable material thickness from 0.01 to 3.0mm
  • Possible measurement modes:
    • Line measurement
    • Micro-traversing
    • Macro-traversing
    • Macro-traversing with track measurement
  • High-precision thickness measurements thanks to the multicolour confocal process
  • Adapted to the requirements of “Industry 4.0”
  • Measurements on any materials or surfaces
  • Innovative operation and measurement software LTM-S
Materials: FE-, NF materials, plastic, paper, wood and also foils
Measuring method: Static and dynamic measurement, multicolour laser confocal process
Measuring range:
0.01mm ... 3.0mm
Resolution: 0.25 µm
Positioning accuracy: ±  1mm
Positioning velocity: 12m/min
Material velocity: max. 1.800m/min
Work space:
7.4mm, ± 3.7mm around measuring focus
Max. deviation of measurement at calibration normal: 0.5µm (The specified repeat accuracy  respectively measurement deviation applies to an angle deviation ≤ 1° and variation of the pass line.)

To top