• I20

    Non contact dual sensor double sheet detector of steel and non-ferrous materials

  • IS42-30GS-IE42-30GS

    Sensor pair IS20-30GS / IE20-30GS

    Steel magn. [FE]: 0.05 - 4 mm

    Aluminum [NF]: 0.05 - 5 mm

    Stainl. steel aust. [NF]: 0.2 - 5 mm

  • IS20-30GS-IE30-30GS

    Sensor pair IS42-30GS / IE42-30GS

    Steel magn. [FE]: 0.15 ... 8 mm

    Aluminum [NF]: 0.1 ... 16 mm

    Stainl. steel aust. [NF]: 0.5 ... 16 mm

  • ISQ42S-IEQ42S

    Sensor pair ISQ42S / IEQ42S

    Steel magn. [FE]: 0.15 ... 8 mm

    Aluminum [NF]: 0.1 ... 16 mm

    Stainl. steel aust. [NF]: 0.4 ... 16 mm

  • I20

    I20 Control Unit

  • Non contact dual sensor Double Sheet Detector of steel and non-ferrous materials
  • 3 interchangeable pairs of sensors for Double Sheet Detection:
    steel .005 - 8.00 mm (.0001 - .315 in.) and non-ferrous materials .01 up to 16.00 mm (.0004 - .629 in.) according to material type
  • Adjustment by Teach-In procedure
  • Digital indication of sheet thickness and operational parameters
  • Memory for 255 different parameter sets (sheet thicknesses)
  • Monitoring of over gauge and under gauge limits
  • Monitoring of supply voltage and sensor gap
  • Data backup via USB interface (also via Fieldbus)
  • Inputs of Fieldbus version:
    Addressing via Fieldbus
    Measurement start also via potential free 3-bit PLC input interface
  • Inputs of I/O version: Addressing via potential free 10-bit PLC input interface
  • Potential free outputs for under gauge, nominal gauge, over gauge, warning and enable Opto coupler
  • Optional Fieldbus interfaces: Profibus, DeviceNet, ControlNet, Interbus, CANopen, ProfiNet
  • I20-2-O-S: 2-channel system with Optocoupler-IO interface
  • I20-4-O-S: 4-channel system with Optocoupler-IO interface
  • I20-2-xx-S: 2-channel system with Optocoupler-IO and Fieldbus interface
  • I20-4-xx-S: 4-channel system with Optocoupler-IO and Fieldbus interface
Technology: Inductive transmission principle
Sensors: IS/IE20-30GSIS/IE42-30GS
Meas. area:
Steel magn. [FE] 0.05 ... 4 mm0.15 ... 8 mm
Aluminum [NF] 0.05 ... 5 (16) mm0.1 ... 10 (16) mm
Stainl. steel aust.[NF] 0.2 ... 5 (16) mm0.5 ... 10 (16) mm
Non-metals ----
Air gap: 40 mm80 mm
Particularity: Wall mount enclosure or front panel mountingWall mount enclosure or front panel mounting
Meas. time: starting from 2 msstarting from 2 ms
Applications: Double Sheet Detection for heat presses, Magnetic belt conveyor, belt conveyors
Material + Thickness: see sensors
Meas. method: Dual sensor non-contact
Function principle: Inductive transmission principle
Programs: 255 measurement programs possible
Paricularities: Double blank detection, suitable for bowed and vibrating sheets.
  Large sensor gap up to 80 mm (3.15 in.).

Üste