SHS42G-FB Series
Application
Spring loaded sensor brackets with bellow suction cup, for utmost sensor contact on inclined or undulated sheet stacks. Various
rubber hardnesses for different surface requirements.
Features & Technical Data
| Suitable sensors: | P42GS, P42AGS, PW42GS, PW42AGS |
| Diameter of suction cup: | 105 mm (SHS42G-FB) |80 mm (SHS42G-FB80) |
| Spring travel: | approx. 34 mm, plus approx. 20 mm compression travel (SHS42G-FB), plus approx. 17mm compression travel (SHS42G-FB80) |
| Total height (unloaded): | approx. 128 mm |
| Weight: | approx. 1.2 kg (2.64lbs) (SHS42G-FB) | approx. 0.75 kg (1.65 lbs) (SHS42G-FB80) |
| Mounting: | Hole 20.5 mm for SHK clamping device |
| Pressure force at 1/2 spring travel: | approx. 60 N |
| Sensor mounting: | Thread M42 x 1.5 |
| Vacuum feed: | Hose 8 mm OD |
| Suction delay time:* | approx. 0.5 s |
* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)
Device Variants
- SHS42G-FB (red)
Spring loaded sensor bracket with bellow suction cup (red), hardness 45 shore - SHS42G-FB_GE (yellow)
Spring loaded sensor bracket with bellow suction cup (yellow), hardness 55 shore - SHS42G-FB80 (red)
Spring loaded sensor bracket with bellow suction cup (red), hardness 45 shore - SHS42G-FB80_GE (yellow)
Spring loaded sensor bracket with bellow suction cup (yellow), hardness 55 shore
Application Characteristics
| For vertical destacker: | + | |
| For robot loader and high speed linear destackers: | 0 | |
| For inclined sheet stacks: | + | |
| For Tailor Welded Blanks (TWB): | + | |
(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)
Spare parts
| SHS42G-FB | SHS42G-FB80 |
| Bellow suction cup 2395045 (red) Hardness: 45 shore | Bellow suction cup 2395100 (red) Hardness: 45 shore |
Bellow suction cup | Bellow suction cup 2395216 (yellow) Hardness : 55 shore |
| Kit ressort 2395117 | |
Accessory
| SHK | Clamping device for mounting of sensor brackets to destacking tools with crossing over clamp 25 mm. |
For your individual application test, go directly to our
Downloads for SHS42G-FB Series
