SHS42GS Series
Application
Spring loaded sensor brackets with flat suction cup, strong hold on even sheets due to suction cup (SHS42GS, SHS42GS-85).
For narrow sheets and applications where the weight of sensor brackets is critical (SH42GS).
Features & Technical Data
| SH42GS | SHS42GS | SHS42GS-85 | ||
| Suitable sensors: | P42GS, P42AGS, PW42GS, PW42AGS | |||
| Diameter of suction cup: | - | 115 mm | 84 mm | |
| Spring travel: | approx. 26 mm | approx. 26 mm | approx. 26 mm | |
| Total height (unloaded): | 98 mm, plus sensor excess length | 141 mm | 129 mm | |
| Mounting: | Hole 20.5 mm for SHK clamping device | Hole 20.5 mm for SHK clamping device | Hole 20.5 mm for SHK clamping device | |
| Weight: | approx. 0.75 kg (1.65 lbs) | approx. 1.25 kg (2.75 lbs) | approx. 0.95 kg (2.09 lbs) | |
| Pressure force at 1/2 spring travel: | approx. 48 N | approx. 48 N | approx. 48 N | |
| Sensor mounting: | Ø 43 mm | Thread M42 x 1.5 mm | Thread M42 x 1.5 mm | |
| Vacuum feed: | - | Hose 8 mm OD | Hose 8 mm OD | |
| Suction delay time:* | - | approx. 0.1 s | approx. 0.1 s | |
* is heavily dependent on vacuum strength, tubing resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)
Device Variants
- SH42GS
Spring loaded sensor bracket - SHS42GS
Spring loaded sensor bracket with flat suction cup - SHS42GS-85
Spring loaded sensor bracket with flat suction cup
Application Characteristics
| SH42GS | SHS42GS, SHS42GS-85 | |
| For vertical destackers: | + | + |
| For robot loader and high speed linear destackers: | - - | - |
| For inclined sheet stacks: | - | 0 |
| For Tailor Welded Blanks (TWB): | - | - |
(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable/ "+" = well suited / "++" = best suited)
Spare parts
| SH42 GS | SHS42 GS | SHS42 GS-85 |
| Spring Kit 2395117 | ||
| Sealing ring 2395126 | ||
| Rubber lip 2395110 (black) | Rubber lip 2395168 (black) | |
| Rubber pressure pad 2395109 | Rubber pressure pad 2395167 | |
Accessory
| SHK | Clamping device for mounting of sensor brackets to destacking tools with crossing over clamp 25 mm. |
For your individual application test, go directly to our
Downloads for SHS42GS Series
