• A100

    A100

    Single sided Double Sheet Detection

    FE-Material from 0.04 to 4 mm Sheet thickness

  • A100

    A100

    Single sided Double Sheet Detection

    FE-Material from 0.04 to 4 mm sheet thickness

  • A100-S

    A100-S

    Single sided Double Sheet Detection

    FE-Material from 0.04 to 4 mm sheet thickness

  • A100

    A100

    Single sided Double Sheet Detection

    FE-Material from 0.04 to 4 mm Sheet thickness

  • A100

    A100

    Single sided Double Sheet Detection

    FE-Material from 0.04 to 4 mm sheet thickness

The new TNxxS sensors complete the system A100 by sensors, which are provided with a plug connection. The new connection cables are now available with both straight and angled connectors. The TN sensors are single-sided contacting sensors with a permanent magnet. This results in a very low energy consumption and a very fast response time. They are suitable for steel sheets and especially for tinplate. The 4 sensors TN08S, TN15S, TN30S, TN40S cover a measurement range from 0.08 to 3.6 mm (based on single sheet).

  • Single probe sensors, permanent-magnetic
  • Measurement of Ferrous material .04 - 3.6 mm (.002in. - .141 in.) single sheet thickness
  • Easy setup by key operation or via control input
  • LCD display for visualization of nominal / current values, operational / error messages, key allocation
  • Compact enclosure for DIN-rail mounting, protection class IP00
  • A100: Compact enclosure for DIN-rail mounting, protection class IP00
  • A100-S: Compact enclosure for screw-on mounting, pluggable connections, protection class IP54
  • A100-IP65: Control unit in protective enclosure, for machine mounting, protection class IP65
Technology: Permanent magnetic
Sensor: T04TN40S
Meas. range:
Steel magn. [FE] 0.04 ... 1 mm0.3 ... 3.6 mm
Aluminum [NF] ----
Stainl. Steel Aust.[NF] ----
Non-metals ----
Air gape: 00
Particularity: Sheet is attracted by the sensorSheet is attracted by the sensor
Meas. time: 15 ms15 ms
Applications: Einseitige kostengünstige Doppelblecherkennung von FE-Material mit verschiedenen Sensoren von 0,04 bis 3,6 mm Blechdicke - überwiegend allerdings für Weißblech in der Metallverpackungsindustrie wegen der magnetischen Haftkräfte bei dickeren Blechen.
Material + Thickness: Measurement of ferrous materials .04 - 3.6 mm (.002in. - .141 in.) single sheet thicknesss
Meas. method: Single probe Double Sheet Detection
Function principle: Single probe sensors, permanent-magnetic
Programs: 1 measurement program, memory storage
Switching thresholds: 85% and 115% of nominal value
Special features: Easy setup by key operation or via control input.

  LCD display for visualization of nominal / current values, operational / error messages, key allocation.
  Compact enclosure for DIN-rail mounting, protection class IP00.
Note: Information on other and older sensors are documented in the manual.