UFD40
Applications
The UFD40 can be used in round mode to detect and position weld seams on tubes, cans or drums.
For this purpose, an eddy current probe can be attached to the inside and outside of the round body.
In addition, butt welds on wires, cables and strips can be detected in flat mode.
Features & Technical Data
- Modular design
- High measuring rates for high positioning accuracy
- Independent real-time communication of the measuring channels with the machine PLC
- Industry-compatible interfaces for automation
- PC software for visualization and administration of the measuring channels
| Function principle: | Eddy current |
| Material: | All metals |
| Wall thickness: | Up to solid material |
| Diameter: | 1 - 90 mm |
| Velocity: | 0.01 -10.0 m/s |
| Measuring channels: | 1 or 2 differential, independent functions of the measuring channels |
| Type of weld seam: | All |
Device variations
| UFD40-1EC-XX-S-CC | Universal Fault Detector in compact version, 1 differential channel |
| UFD40-2EC-XX-S-CP | Universal Fault Detector in compact version, 2 differential channels |
| Versions XX: | IO: I/O connection PR: ProfiBus PN: ProfiNet |
Sensors
- Encircling coils with fixed diameter: 5 / 13 / 20 / 40 / 60 mm diameter
- Encircling coils with exchange coil: 1-15 mm in steps of 1 mm / 16-90 mm in steps of 2 mm / Option: pre-magnetization
- Segment coils: In preparation
- Probes: track width 1.6 ... 16 mm
For your individual application test, go directly to our
Downloads for UFD40
